Videos of Machines in Action

Want a Quote on this Machine? Fill out the form below.

Your Name:*
Company Name*
Address Information
- This address is a residence
In order to get an accurate freight quote, we need to know if this is a residential address
Address*
Street Address Address Line 2 City State ZIP Code
Phone*
Email*
Name
This field is for validation purposes and should be left unchanged.

#80U- Swing Style Clamp Carrier

Smaller Gluing Systems that are Inexpensive and Productive

Designed for the Small and Medium Shops who produce up to

250 – 300 Panels per Day

The #80U Swing Style Clamp Carrier is a reliable and versatile clamping machine. This rugged, heavy duty design will handle any job in your custom shop.

Features:

Push Button Flattening
Push Button Tightening & Loosening
Joystick’ Power Rotation with an Air Motor Drive
Heavy Duty Frame with Steel Base
Frame Widths Ranging in Size from 8.5 Ft – 16.5 Ft Wide
Taylor Clamp Arms with a range in size from 32″ – 44″
- 2-1/2″ (65mm) & 3-1/2” (90mm) High Clamp Jaws
- Up to 6” (150mm) Thick Gluing with Optional Rocker Plate Jaw Extensions

(Additional Details and Info Below)

Taylor Clamp Carriers are expandable and upgradeable. The number of sections can be increased at anytime to allow for more clamp time and cure time. When higher production is needed, the tightener & flattener system can be switched out and upgraded to a more automated and productive front end at any time. The clamp carrier frame and the clamp arms can all be reused, keeping the cost of the project lower.

Get a Quote

Call Me

Swing Style Tightener
Swing Style Panel Flattener
Operation
Typical End Users
Brochures & Spec Sheets
Gluing Questionnaire

Swing Style Tightener

The Swing Style Clamp Tightener is the most economical system. The push button controls provide easy and rapid tightening and loosening of the clamps. The carriages ride on an overhead beam. Clamp pressure is fully adjustable up to 3,000 lbs. per clamp. Engagement is smooth and easy. The Flattener operation is also push button and pressures are adjustable. The two units are moved to the left or right side of the machine when rotating to the next row of clamps. The front rest is manual and the rotation is pneumatic.
(This system is only available in a pneumatic version.)

Swing Style Panel Flattener

The Taylor Panel Flattener is designed to hold the stock flat while each clamp is tightened. The flattener rides on ball bearings on an overhead beam and is activated by a 3” air cylinder and is interlocked with the Semi-Automatic Tightener for a rapid safe operation. The flattener stays energized until the operator lifts up on the lever. At 90 psi, the downward force on the stock exceeds 625 lbs. which produces high quality flat panels.

Operation

Operation of a Gluing Cell

Glue is applied with a Converyorized Glue Applicator
The Operator places the material in the clamps and aligns the edges with glue on them
The Clamp Tightener and Panel Flattener are used to tighten the clamps and flatten the material
When all of the clamps are tight, the operator can index the machine to the next section by using the joystick valve
the clamp tightener is used to loosen all of the clamps, and the cured panels or laminations are removed
The loading procedure is then repeated

Typical End Users

Typical end users:

Custom Cabinet Door Shop
Architectural Moulding and Millwork
Custom Stair Components
Smaller Furniture Manufacturer

Brochures & Spec Sheets

Gluing Questionnaire

To provide the proper machine specifications, we need to know some information about your products. Please answer the following questions.

Step 1 of 3

Your Company's Name
Your Company's Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Phone
Fax
Contact Person
First Last
Email